STRUCTURE AND FUNCTION L.H. PPC VALVE (STANDARD) 3. During fine control (when the lever is returned) (fine control neutral) When disc (5) starts to be returned, spool (1) is pu- shed up by the force of centering spring (3) and the pressure at port P1 . When this happens, fine control hole f is connected to drain chamber D and the pressure oil at port P1 is released. If the pressure at port P1 drops too far, spool (1) is pushed down by metering spring (2), and fine con- trol hole f is shut off from drain chamber D .
At almost the same time, it is connected to pump pressure chamber PP , and the pump pressure is supplied until the pressure at port P1 recovers to a pressure that corresponds to the lever position. (Fig. 3). 5 4 3 2 f D T P f 1 PP P 2 P 1 Fig. 3 RKS00880 10-69 SK714-5 SK815-5