3.1.17. Water pump Remove the water pipe connected to the expansion tank. Remove the water pipe and hoses con- nected to the water pump. Unscrew the water pump fixing bolts and remove the water pump. 3.1.18. Injection pump Remove the oil supply pipe and return pipe connected to the fuel injection pump. Unscrew the bolts connecting the cou- pling and drive shaft, loosen the injection pump attaching bolts, then disassemble the injection pump. NOTE : As far as possible, place the No.1 cylinder in ‘OT’ position to disassemble the injection pump. EAMD021I Release the pump fixing bracket bolts to disassemble the bracket from the cylin- der block. NOTE :
Do not interchange the shims as they must be installed in their original positions at reassembly. EAMD022I 3.1.19. Oil filter Using a filter remover wrench, remove the oil filter cartridge. Remove the pipe connected to the oil cooler. Loosen the oil filter fixing bolts and dis- assemble the oil filter head from the cylinder block. - 33 -