3.1.20. Fan drive pulley Remove the bolts and disassemble the fan drive pulley. 3.1.21. Vibration damper Unscrew the pulley fixing bolts and dis- assemble the pulley-vibration damper assembly. Unscrew the vibration damper fixing bolts and disassemble the damper from the pulley. 3.1.22. Timing gear case cover Disassemble the oil seal using an oil seal removing jig. Remove the cover fixing bolts and disas- semble the cover from the timing gear case. EAMD025I 3.1.23. Idle gear Unscrew the idle gear fixing bolts and disassemble the thrust washer and idle gear. Disassemble the idle gear pin using a rubber hammer to prevent damage to them. - 34 -