daewoo DE12T / P126TI — Daewoo DE12T / P126TI User Manual

3.1.24. Fuel injection pump drive assembly Unscrew the injection pump drive shaft bearing housing fixing bolts and remove the injection pump drive assembly which the shaft, gear, bearings, and housing are put together. EAMD027I 3.1.25. Cylinder head cover Unscrew the cover fixing bolts and dis- assemble the cover. Keep the bolts in an assembly state so that the packings and washers may not be lost, and keep the cover packing as assembled with the cover. 3.1.26. Rocker arm assembly EAMD028I Unscrew the rocker arm bracket bolts and remove the rocker arm assembly.

Take off the snap rings to remove the washers and rocker arm, then unscrew the bracket fixing bolts to take off the bracket and springs. Take out the push rods. EAMD029I 3.1.27. Injection nozzle Remove the nozzle fixing nuts and extract the nozzles. Remove the nozzle tube using nozzle tube removing jig. Do not perform disassembly operation unless coolant, gas, etc. leak out. EAMD030I - 35 -