3.1.28. Cylinder head Unscrew the cylinder head fixing borts and take off the cylinder head. Remove the cylinder head gasket. EAMD031I 3.1.29. Valve and valve stem seal Compress the valve spring retainer using a jig and take off the valve cotter pins. Disassemble the valve springs and retainers. Take off the valves. Remove and discard the valve stem seal Valve spring compressor using a general tool as it should not be re-used. EA0M4007 3.1.30. Oil cooler Remove the water pipe connected to the water pump. Remove the oil pipe connected to the cylinder block. Unscrew the oil cooler cover fixing bolts and disassemble the oil cooler assembly from the cylinder block.
Unscrew the oil cooler fixing bolts and remove the oil cooler from the oil cooler cover. EAMD033I - 36 -