daewoo DE12T / P126TI — Daewoo DE12T / P126TI User Manual

Identify the mark “Y” or “TOP” on the ring end to prevent the top and bottom of the piston ring from being interchanged and make the marked portion face upward. Marked with the name of piston ring manulacturing company EAMD090I Adjust the angle among individual piston ring gaps to 90( and fit a piston assem- 45 O 45 O bling jig onto the piston, Use care not to Top ring gap 2nd ring gap match the ring gaps with the pin direc- tion. Install the bearing by aligning it with the 90 O connecting rod key groove and apply oil Piston pin to the bearing and piston. Oil ring gap Piston EA8M3006 Position the valve seating surface toward the tappet hole and insert the piston with hand.

Use care not to damage the cylinder Tappet hole liner and piston, and slightly lift and insert the piston into the cylinder so Valve seating that the ring may not be damaged by the fillet of the liner. Install the bearing in the connecting rod EAMD092I cap and apply oil. Make sure that the manufacture serial numbers impressed on the connecting rod cap and connecting rod big end are identical, and install the connecting rod cap by aligning it with dowel pin. Wet the fixing bolts with oil, semi-tight- enthem with hand, tighten them to 15 kg.m for 1st stage and 22 kg.m for 2nd stage respectively, and finally to speci- fied torque. - 66 - Torque 28 kg•m