3.3.18. Oil pan Mount gasket and put the oil pan there- on. Place stiffeners and tighten bolts. Align the bolt holes with gasket holes to prevent damage to the gasket and tight- en to specified torque. EAMD034I 3.3.19. Intake and exhaust valves Identify the marks of “IN” and “EX” impressed on the valve head before assembling the valve with the valve head. With a valve stem seal fitting jig, assem- ble the valve stem seal with the valve guide. After installing valve springs and spring retainer, press the retainer with a jig, then install cotter pin. Tap the valve stem lightly with a rubber hammer to check that the valve is assembled correctly.
Valve spring compressor EA0M4007 - 68 - Torque 2.2 kg•m