daewoo DE12T / P126TI — Daewoo DE12T / P126TI User Manual

3.3.24. Oil cooler Install the oil cooler onto the oil cooler cover. Carefully apply the gasket to prevent oil leakage. Do not damage the gasket and install the cover onto the cylinder block. Connect a connection pipe between the water pump and oil cooler. EAMD106I 3.3.25. Oil filter Install the oil filter onto the cylinder block, and tighten the fixing bolts. With the hollow screw, assemble the oil pipe connected between the oil cooler and cylinder block. Install a connection pipe between the oil cooler and oil filter. Install the oil cooler connecting pipe. Install packing and assemble the car- tridge using a filter wrench. 3.3.26.

Injection pump Install the injection pump bracket in the cylinder block. After measuring the amount of run-out with an alignment setting jig, disassem- ble the bracket, adjust the shims, then reassemble it. Mount the top/bottom adjusting shims in the bracket and then mount the fuel injection pump. Tighten the fixing bolts in a diagonal sequence to specified torque. - 73 - EAMD10 Run out 0.2 mm or less Torque 4.4 kg•m