daewoo DE12T / P126TI — Daewoo DE12T / P126TI User Manual

4.1.2. Water pump Loosen the bolt (16) to disassemble the housing cover (15). Heat the impeller (6) slightly, then remove it using a puller jig. Remove the mechanical seal. Unscrew the socket bolt (12) and remove the shaft and bearing assembly from the housing. With a press, remove the spline shaft and bearing. Reverse the disassembly sequence for reassembly operation. Replace the oil seal (7) with a new one at reassembly. To reassemble the impeller, maintain a constant gap (0.3 ~ 0.6 mm) between the impeller and pump housing using a feeler gauge.

Thickness 0.3 ~ 0.6 2 1 9 Par latex coating 11 4 6 5 13 7 10 8 12 11 14 13 12 EAMC001I 1.Water pump housing 8.Ball bearing 13.Spline shaft 4.Shaft 9.Space 14.Gasket 5.Mechanical seal 10.Ball bearing 15.Housing cover 6.Impeller 11.Bearing cover 16.Bolt 7.Oil seal 12.Socket bolt - 82 -