daewoo DE12T / P126TI — Daewoo DE12T / P126TI User Manual

(2) Inspection and adjustment Adjusting the primary opening pressure a. Install the plate of plate assembly (157944-9520) onto a vise. NOTE : Use the plate assembly (157944-9520) in fixing a nozzle holder having a flange. A nozzle holder without flange should be directly installed onto a vise. EQM4030I b. With the nut, install the two pins on the plate. c. Install the nozzle holder body (1) onto the plate with the cap nut side facing downward. d. Assemble adjusting shim (10), secondary spring (11), and spring seat (12) on the nozzle holder body in the order as described. Note: The secondary spring is the same one as the primary spring. e.

Assemble the pin (14), lift piece (13), and spacer (15) with the nozzle holder body. - 108 - 1 EQM4031I M4031I 12 11 10 EQM4032I M4032I 15 14 13 EQM4033I M4033I