daewoo DE12T / P126TI — Daewoo DE12T / P126TI User Manual

f. Install the pin (16) and nozzle (A) onto the spacer. g. After installing the gasket (157892-1500) on the nozzle, use the cap nut (157892- 4000 : SW22mm) to fix the nozzle onto the nozzle holder. Note : While tightening the cap nut, keep checking to see if the lock pin comes all the way into the nozzle. Note : Tighten the retaining nut until it resists hand tightening, then fur- ther tighten it using a torque wrench. h. Be sure to follow the specified torque rat- ing when tightening the adjusting retaining nut. i. With the cap nut facing upward, install the nozzle holder on the plate. - 109 - A 16 EQM4034I EQM4034I 7 EQM4036I EQM4036I Torque 6.0 ~ 8.0 kg•m