j. Assemble the push rod (2), primary spring (3), and adjusting screw (4) on the nozzle holder in the order described. k. Install the gasket and cap nut onto the adjusting screw. l. Assemble the nozzle and nozzle holder assembly to the nozzle tester (105785- 1010). m. Adjust the primary opening pressure to the specified pressure using the adjusting screw (4). n. With a monkey wrench, fix the nozzle hold- er securely and tighten the cap nut (SW 19mm) to specified torque. - 110 - 40 60 80 20 0 100 EQM4039I EQM4039I EQM4040I EQM4040I EQM4041I EQM4041I Torque 3.0 ~ 4.0 kg•m