daewoo DE12T / P126TI — Daewoo DE12T / P126TI User Manual

5.5.6. Bleeding the fuel system After the cleaning of the fuel filter or after the engine stop by the lack of fuel, the bleeding of the fuel system must be executed by all means. Bleed the system by manually operating the priming pump with fuel filter outlet joint bolt and injection pump bleeder screw loosened. Priming pump Press the feed pump cap repetitively until the fuel without bubbles comes out from EA9O4005 the bleeding valves. After the whole air is pulled out, close the valve of the filter. Confirm the resistance of fuel delivery by the repetition pressing of the feed pump cap, Pressure and turn the feed pump cap simultaneously to close it. 5.5.7.

Injection pump Check the fuel injection pump housing for cracks or breaks, and replace if damaged. Check and see if the lead seal for idling control and speed control levers have not been removed. No alterations must be made to the injection pump. If the lead seal is damaged the warranty on the engine will become null and void. We strongly recommended that any faults developing in the injection pump should be taken care of by authorized specialist personnel. 5.6. Injection Nozzle Maintenance (by authorized specialist personnel) The injectors are designed to spray the fuel delivered by the injection pump directly into the spherical combustion chamber in the piston crown.

The injector consists of the nozzle and the nozzle holder. A copper seal fitted to the injector ensures gas-tight seating and good heat dissipation. The opening pressure of the nozzle is adjusted by means of shims at the EA0M3003 compression spring. - 39 -