Tighten the coupling fixing bolts and nuts to specified torque. EAMD021I Tighten the drive shaft connecting flange fixing bolts to specified torque. Install the oil delivery pipe and return pipe. 6.3. Tightening the cylinder head bolts The cylinder head bolts are to be tightened in the sequence shown in the illustrations, First tighten the bolts slightly, then slightly more again and finally tighten with a torque wrench. EAMD102I 8 9 3 2 12 13 1 4 11 14 5 6 7 10 EAMD103I The tightening by excessive torque may cause the damages of the cylinder head gaskets, the flanges of cylinder liners and the cylinder head bolts, therefore obey the regular torque.
- 45 - Torque 6.0 kg•m Torque 7.5 ~ 8.5 kg•m Type 1 Type 2 Specification TY 12.9T M14x1.5x153 TY 10.9T M14x1.5x150 Torque 24.5 kg.m 6 kg.m +180°+150°