6.4. Cylinder compression pressure 1) Stop the engine after warming it up, then remove the nozzle assemblies. EA9O5003 2) Install a special tool (gauge adapter) in nozzle holder hole and connect the compression pressure gauge to the adapter. 3) Cut off fuel circulation, rotate the starter, then measure compression pressure of each cylinder. EA9O5004 - Testing conditions : at water temperature of 20 °C and speed of 200 rpm (10 turns) - 46 - Standard 24~28 kg/cm2 Limit 24 kg/cm2 or less Allowance among cylinders L10% or less