. OPERATION MACHINE OPERATIONS AND CONTROLS STARTING ENGINE WARNING or fire. 3 - 98 Start the engine o nly after sitting down in the opera Do not attempt to start the engine by short-circuitin g the engine startin g circuit. Such an act may c ause a serious bodily i njury Check that there are no persons or obstacles in the surrounding area , then sound the horn and st Never use startin g aid fluids as they may cause exp Exhaust gas is to xic. When starting the engine in c onfined spaces, be particularly careful to ensu NOTICE Before starting th e engine, check that fuel control dial (2) is at the lo idling (MIN) posit position, the engi engine parts. ion.
If the fuel control dial is at the full speed (MAX ne will accelerate suddenly and cause damage to th Do not keep the continuously for If the engine does key in starting switch (3) at t more than 20 seconds. not start, wait for at least 2 minut he START positio es, then start agai from the beginnin After the engine g. starts, wait for the engine oil pressure monitor to g out. Do not touch pressure monitor the control levers or control pedal while the engine o is lighted up. This machine is e quipped with an engine autom atic preheating d evice that functions to sta rt the engine preheating automatically.
If the ambient tem perature is low, the preheating monitor will light up when the key in starti ng switch (3) is turn ed to the ON position to inform the operator that preh eating has been started 1. Check the lock lever (1) is in the LOCK position (L). If the loc lever is in the FREE position (F), the engine does not start. 1. Check the loc k lever (1) is in the LOCK posit ion (L). If the loc FREE position (F), the engine 2. Set fuel contro l dial (2) to the low idling (MIN