. MAINTENANCE MAINTENANCE PROCEDURE CHECK OIL LEVEL IN FINAL DRIVE CASE, ADD OIL WARNING 4 - 47 EVERY 250 HOURS MAINTENAN Maintenance for ev ery 10 hours service should be carrie d out at the The parts and oil ar e at high temperature i mmediately after th e engine is stopped, and may cause serious burns. Wait for the temperature to go d own before starting the operation If there is still press ure remaining inside th e case, the oil or plug may fly Loosen the plug slo wly to release the pres Prepare a handle Set the TOP m perpendicular to Remove plug (F the ground surface. ) using the handle.
W a point 10 mm ( 0.4 in) below the bot correct amount of oil has been adde If the oil level i s too low, install plu levers, and driv one turn. Then r e forward or in rever epeat Step 2 to chec se to rota k again. 4. If the oil level is low, add oil through the hole o f plug (F). Add oil until oil overfl ows from the hole of plug (F). 5. After checking, i hole, the