Komatsu — CHECK LEVEL OF BATTERY ELECTROLYTE

. MAINTENANCE MAINTENANCE PROCEDURE WARNING doctor. the 4 - 48 CHECK LEVEL OF BATTERY ELECTROLY Carry out this procedure before operating the ma Do not use th e battery if the batt ery electrolyte level is below the LOWE R LEVEL line. This will a ccelerate deterioration nside of the battery and reduce the service life of th e battery. In additio n, it may cause an explo The battery g enerates flammabl e gas an d there is da nger of explosion, do not bring fire or spar Battery electr olyte is dangerous .

If it get s in your eye s or on your skin, wash it off with a large a mount of water and con NOTICE When adding distilled water to the battery, do not allow the battery electrolyte to go above the UPPER LEVEL line. gh, it may leak and cause damage to the paint surface or corrode other parts. l electrolyte evel is too hi gh, it may leak and cause d amage to th e paint surface or When adding distilled water in c old weather, add it b efore starting ope rations in the morning to prevent the electrolyt freezing.

Inspect the bat tery electrolyte l evel at l east once a month and foll ow the basic safety pr ocedures given belo Open cover (1 the machin are installed at When Checking Electrolyte Level from Side of Bat If it is possible to check the ele ctrolyte level from the side of the b attery, check as follow 1. Use a wet cloth to clean the area around the electrolyte level lines and check that the electrolyte level is between the UPPER LEVEL (U.L.) and LOWER LEVEL (L.L.) lines. If the battery is wiped with a dry cloth, static electricity may cause a fire or explosion. .

Use a wet cloth to clean th e area around the electrolyte level check that the electrolyte level VEL (U.L.) and LOWER LEVEL (L .L.) lines. ry is wiped with