Komatsu — CHECK LEVEL OF BATTERY ELECTROLYTE

. MAINTENANCE MAINTENANCE PROCEDURE MAINTENANCE MAINTENANCE PROCEDURE 3. After adding distilled water, tighten cap (2) securely. REMARK (sodium or battery, or there is no display of the UPPER REMARK with of or your battery maker. 4 - 49 2. the midwa UPPER LEVE L (U.L.) and LOW ER LEVE L (L.L.) lines, r cap (2) and ad d distilled water t o the U.L.

If distilled water is added to above t he UPPE R LEVEL (U.L use a syringe to l Neutralize the ower the level to t removed fluid he UPPE with bak th a large bicarbonate), then flush it away wi consult your Kom atsu distributor or battery m When it is Impossible to Check Electrolyte Level from Side of Battery If it is impossible to check the elec trolyte lev el from the si as follows. LEVEL line on the side of the batte ry, check 1. Remove cap ( 2) at the top of the battery, lo ok through the filler port (3) , and check the electrol yte surface. electrolyte doe s not reach the sl eeve (4), add distilled w that the level r line) without fa (A) Suitable level:

Electrolyte level is u p to bottom of s so surfac e tension causes elec surface to ectrolyte level is bulge and not up to les appear straig ht and not 2. After adding d istilled water, tigh ten cap (2 If water is added to above the bottom tip of the sleeve, use a to remove electro sodium bicarbona lyte. Neutralize te, then flush it the remo away with When it is Possible to Use Indicator to Check Electrolyte Le If it is possible to use an indicator to check th e electrolyte l evel, follow the instructions giv