. MAINTENANCE MAINTENANCE PROCEDURE CLEAN,CHECK RADIATOR FINS,OIL COOLER FINS,FUEL COOLER FINS,AFTERCOOLER FINS,CONDENSER FINS (machines equipped with air conditioner),PTO OIL COOLER WARNING NOTICE 4 - 56 If compressed air, h igh-pressure wate r, or steam hits yo ur body directly o r dirt is sent flying by the com pressed air, high-pressure wate r, or steam, th ere is danger of pe rsonal injury. Alwa ys wear protecti ve glasses, dust mask, and ot her protective equipment.
Whe n using compr essed air, use fro m a distance to pre vent damage to the fins In particular, with t he fuel cooler and aftercooler, blow with compressed air at an angle of 45° with the nozzle at a distance of at least 300 mm (11.8 Neve r blow the com pressed air at rig ht angles to the co re. If the fins are damaged, it may cause coola nt leakage or overheating. O n dusty jobsites, check the fins dail y, irrespective of t he maintenance interva 1. Open rear du cts (1) and (2) a t the right side o f the machine. For duct (1), r emove 4 bolts (3 ); for duct (2), re move 8 bolts (4 Then open th e ducts.
, dust or leaves clogging the radiator fins (E), o ), fuel cooler fins (B), after cooler fins (C) and PT 2. Blow off mud cooler fins (D iator fins (E), o ins (C) and PT f cooler (F) us ing compressed air. At the same time, clean th net in front o f the oil cooler. Clean the conde nser fins (A) o pressed air, b machines eq uipped with air c onditioner. d instead of com Steam or wa ter may be use maintain the proper distance from the fins. Cleaning can also be carried out by rotating th e fan in revers The aftercoo ler fan is not equ ipped with a fan reverse rotatio unction. For details o f rotating the fan in reverse, see "Fan Revers GE 3-27)". Rotation (PA 3. Check the ru bber hose.
Repl ace with a new o ne if the hose i f ound to hav Also, check e cracks or to be hose clamps for hardened by ag looseness. ing.