. MAINTENANCE MAINTENANCE PROCEDURE MAINTENANCE MAINTENANCE PROCEDURE turn 3 filter cartridge (4) to the left to coat the thread and packing surface of the new filter cartridge with clean oil (or coat it thinly with grease), then install it to the filter holder. REMARK Add oil until the oil level is between the H and L marks on the ENGINE STOPPED side of dipstick (G). 4 - 62 7. Open th e engine room Use a f remove Clean th Check that t here is no old packing stuck t o the filte r holder. I f there is any old p acking stuck t o the filter, i t will cause l eakage of 10. When in stalling, tighte n until the packing surf ace conta cts the sea l surface of the filter h further 3 /4 to 1 turn.
11. After re placing the filte r cartridge, add oil thro ugh oil fill 12. Run the engine for a s hort time at low i dling, th en stop th e engine. Check that the oil level H and L marks. For d etails, see "Check Oil Level in E ngine Oil P an, Add Oil (PAGE 3-