. MAINTENANCE MAINTENANCE PROCEDURE CHANGE OIL IN PTO CASE WARNING the engine is stopped and may cause serious burns. Wait for the oil NOTICE in PTO 4 - 68 Part temperature to go down befor e performing this operatio Park the machi ne on flat groun d and stop th e engine. Aft er waiting fo r more than 30 minutes after stop ping the engine, check the oil Refill capa city: 13.5 liter s (3.5 7 US gal) 1. Remove plug (1) under the chassis, loosen drain valve (2), and drain the oil. Be careful not to loosen the drain valve too far and deform the stopper pin inside the valve. 2. After draining the oil, tighten drain valve (2), then install plug (1). Tightening torque of drain valve (2):
49.0 - 78.5 Nm (5 - 8 kgm, 36.2 - 57.9 lbft) Tightening torque of plug (1): 58.8 - 78.5 Nm (6 - 8 kgm, 43.4 - 57.9 lbft) 1. Remove plug (1) u nder the ch assis , loosen dra in valve (2), and drain the oil. Be carefu l not to l oosen the d rain v alve too far and deform the stopper p in inside the v alve. 2. After drai (1). ghten Tightening torque of drain valve (2): 49.0 - 78.5 Nm (5 - 8 kgm, 36.2 - 57. - 78.5 Nm 9 lbft) (6 - 8 kgm, 43.4 - 57.9 lbft) 3. Refill the specified quantity o f oil th rough oil fil ler (F). 4. Check th e oil leve l. Fo r details, Case, Ad d Oil (PAGE 3 -85)"