. ATTACHMENTS AND OPTIONS AUTO-GREASING SYSTEM INJECTOR POSITION IN AUTO-GREASING SYSTEM AND MANUAL GREASING WARNING 6 - 21 The re is no check device to prevent reverse flo w in t he se rvice grease n ipple installed to the injector. If you forge t to tighte n the cap , there is danger that high-pressure grease may spurt out when the grease pump is actu Be s ure not to forget to t Injector (a) acts to sen d the grease supplie d from th e grease pump to e ach greasing point . If the auto-greasin g system doe s not work properly and grease is not supplied, use th e grease gun and carry out greasing manually from service grease nipple (b) installed to nstalled to eac h injector.
T here is no check device to prevent reverse flow in service g t i rease nipple (b). If you forget to tighten cap (c), there is danger hat high-pressure g rease may spurt ou t when th e grease pump s actuated. Be sur e not to forget to tig hten the cap.
The locations of the s ervice grease nipple s for eac h injector ar e as (1) Boom cylinder foot pin (right) (2 places (2) Boom cylinder foot pin (left) (2 places) (3) Boom foot pin (righ (4) Boom foot pin (left (5) Boom cylinder rod pin (right) (1 place) (6) Boom cylinder rod pin (left) (1 place) in (right) (1 place) ting pin (2 places) (7) Arm cylinder foot p (8) Boom-arm connec (9) Bucket cylinder fo ot pin (right) (1 place (10 ) Bucket cylinder fo ot pin (left) (1 place (11 ) Arm cylinder rod (12 ) Swing circle (4 pl