Komatsu — MONITORING SYSTEM

. OPERATION DETAILED CONTROLS AND GAUGES Back Switch Press switch (8) when in the maintenance mode, will return to the previous screen on the monitor display. 3 - 30 Adjusting Set Value of E 1. Press switch (7) a nd the monitor display s creen chang es to the fan reverse rotati show on the right. 01: Fan reverse r 02: Economy mo 2. When adjusting th the engine outp consumption in E e set value of the economy mode, adjusting ut can provide an improvement in fuel mode. Use UP switch ( reverse rotation", input. The screen There are four lev 9) or DOWN switch (10 then press enter switc changes to the screen els that can be set:

E0 shown in the diag (It is set to E0 wh en the machine is shipp ed from the f actory.) 3. Use UP switch (9 ) or DOWN switch (10) to select E0 - E3. 4. Press input confir The relationship b mation switch (11). etween fuel consumpti as follows. E0: Default set va on fuel consu E1: Economy adj E2: Economy adj E3: Economy ad consumption, For details of prod Mode (PAGE 3-1 as follows. E0: Default set va lue (maximum emphas is on production, not mption) ustment 1 (emphasis on production) ustment 2 (emphasis on fuel consumption) E1: Economy adj ustment 1 (emphasis o n production) E2:

Economy adj ustment 2 (emphasis o n fuel consumptio justment 3 (maximum emphasis on fuel not on production) uctivity in each mode, s ee "Setting Economy Mode (PAGE 3-1 21)". REMARK The closer the sele ction is made to E3, the better the fuel The uel consumption become s, but the production is reduced accordingly. brightness/contrast a djustment mode, or sele ct mode. The