. OPERATION DETAILED CONTROLS AND GAUGES Adjusting Contrast (The selected monitor is inverted to black.) during operation to indicate an abnormality in the warning item. 3 - 33 1. When monitor a pressed monitor displa y screen ch anges to t he brightness/contrast s creen shown in the diagram on the right. 2. Use th e brightness/contras t scree n and p ress up switc down switch (10) to select t he contrast m onitor. (9) or 3. When the scree n changes to the contra st adjustment screen, press up switch ( 9) or down switch (10) to adjust t he contrast . 4. After completing adjustm ent of the contrast, press input input confirmation swit ch (11).
REMARK When th e machine is shipped from th e facto ry, the b acklighting is set to the maximum plus (+). The contrast i s se to the m iddle value . After ad justing, even if the start ing switch is turned OFF, th e adjusted value is retained. Alarm Buzzer Stop Switch Use this switch (13) to stop t he alarm buzzer when it is sounding Use this switch (13 he alar m buzz it is sounding