Komatsu — SWITCHES

. OPERATION DETAILED CONTROLS AND GAUGES SWITCHES (1) (2) (3) (4) (5) (6) (7) (8) Starting switch Fuel control dial Cigarette lighter Swing lock switch Lamp switch Machine push-up switch Boom shockless control switch Horn switch (9) (10) (11) (12) (13) Room lamp switch Emergency pump drive switch Swing parking brake release switch Step light switch Lower wiper switch (machines equipped with fixed front window cab) Revolving warning lamp switch (if equipped) Large capacity airflow air conditioner blower switch (if equipped) (14) (15) Starting Switch Starting switch (1) is used to start or stop the engine. (A): OFF position The key can be inserted or withdrawn.

Switches for the electrical system (except room lamp), are all turned off and the engine is stopped. (B): ON position Electric current flows through the charging and lamp circuits. Keep starting switch key in the ON position while the engine is running. (C): START position This is the engine-start position. Keep the key at this position during cranking. Immediately after starting the engine, release the key. It will automatically return to the ON position (B). (D): HEAT position Regardless of the ambient temperature, the preheating monitor lights up when the key is set to the HEAT position. It then flashes after approx.

30 seconds to inform the operator that the preheating has been completed. 3 - 34