SWITCHES WARNING! To return to previous beam: pull the lever towards the steering wheel again. After you complete a turn, shut the system off by returning the lever to the (center) position. Failure to shut off a turn signal could confuse other drivers and result in an injury ac- cident. An indicator light in the instru- ment panel will flash until the turn sig- nal is turned off. The high beams can be momentarily flashed with or without the headlights being on. To flash the high beams, gently push the headlight lever away from the steering wheel to momentarily turn on the lights. 3 High Beam NOTE NOTE The headlights must be ON for the high beam switch to operate.
NOTE Continued pressing of the high beam flash will not keep the high beams on. The “flash to pass” functionality of the headlight switch is not available for vehicles manufactured with High In tensity Discharge (HID) headlamps. Please check with local regulations regarding restrictions on using high beam flashing. To switch your headlights to lower or higher beam, gently pull the turn signal lever, toward the steering wheel, until you hear the switch click and the beam changes. The blue indicator light in the instrument panel will be ON when the high beam is being used. 3-70 Y53-1200-1B1 (04/13)