PACCAR Inc. T680 — Steering Column Controls

SWITCHES Windshield Wipers/Washer NOTE Your vehicle is equipped with a two-speed, intermittent windshield wiper system. The windshield wiper system is integrated with the exterior lights so that the low beam headlights will turn on when the windshield wipers Flash to pass turn on. The ignition key must be turned to ON or ACC for the wiper/washer switches to operate. To override this function, turn the headlights on and then off again and the low beams will turn off. Permanently overriding this functionality is attainable via the Settings Menu in the instrument cluster ID and Clearance Lights Flash display. Go to Settings - > Wiper Interlock and turn this value to OFF.

3 Wiper/Washer The first position after OFF is the intermittent #1 cycle. The next positions are intermittent #2, #3, and #4. The last two positions are wiper low speed and wiper high speed. A seven-position rotary wiper switch (located on the turn signal lever) operates the windshield wipers and washer. Rotate the end of the turn signal lever to change the wiper mode. To wash the windshield: Push the rotary wash/wipe knob in (towards steering column), hold for more than 0.8 seconds and then release. hold the knob in to extend (04/13) Y53-1200-1B1 3-71