SWITCHES the washing cycle. after the lever is released, the wipers will shut off automatically or resume the wiper’s setting speed. CAUTION 3. Trailer Brake Hand Valve Do not use antifreeze or engine coolant in the windshield washer reservoir - damage to seals and other components will result. This hand valve, mounted on the steering wheel column, provides air pressure to apply the trailer brakes only. It operates independently of the foot treadle valve. See Using the Brake System on page 4-21, for more instructions on proper use of the Trailer Brake Hand Valve.
To activate the wipers for one swipe without activating the washer (“mist” function), push the turn signal lever in (towards the steering column) and release in less than 0.5 seconds. The wipers will perform a single swipe and then resume the wiper’s setting speed. CAUTION 3 If the electric pump is operated for a long period (more than 15 seconds) with a dry reservoir, the pump motor may be damaged. WARNING! Clean blades regularly with a damp cloth to remove road film and wax build-up. Do not drive with worn or dirty wiper blades. They can reduce visibility, making driving hazardous which may lead to an injury accident resulting in death or personal injury.
Check the windshield washing fluid level daily. If necessary, fill to top. Clean all inside and outside windows regularly. Use an alcohol-based cleaning solution and wipe dry with either a lint-free or a chamois cloth. Avoid running the wiper blades over a dry windshield to prevent scratching the glass. Spray on washer fluid first. A scratched windshield will reduce visibility. 3-72 Y53-1200-1B1 (04/13)