HEATING AND AIR CONDITIONING Manual Control Mode For vehicles with a sleeper, the cab control can be used to activate/deactivate the sleeper HVAC using the button inside the mode dial. If you are required to idle your vehi cle for long periods of time, install an auxiliary heater or automatic idle con trol. These auxiliary devices can re duce fuel consumption and save you money. NOTE The manual mode is the default mode when the heating and air conditioning system is turned on. The fan speed, air temperature, and air outlets are selected using the dials on the controller. The temperature of the air from the vents will fluctuate as the vehicle works to achieve the chosen cab temperature.
Note that in manual mode the system does not engage the A/C compressor automatically. To engage the air conditioning, press the button inside the temperature dial. To engage recirculation of cab air, press the button inside the fan speed dial. 3 Adjusting the settings: If you are parked next to idling vehi cles, move your vehicle or do not stay in your vehicle for prolonged periods of time. NOTE Step 1: To adjust the fan speed, turn the fan control dial clockwise to increase speed or counterclockwise to decrease speed. Setting the fan dial to turns the HVAC system off. Step 2: To adjust the temperature setting, turn the temperature control dial to the desired temperature.
The system automatically adjusts the outlet air temperature to achieve the desired cab temperature. Step 3: To adjust the air distribution, turn the air distribution dial to the desired position as indicated by the graphics. 3-82 Y53-1200-1B1 (04/13)