HEATING AND AIR CONDITIONING For Maximum Cooling For Maximum Heating Air Dehumidification Step 1: Adjust the fan speed to high by rotating the fan control dial clockwise. Step 2: Set the air distribution dial to the panel setting. Step 3: Adjust the air temperature to maximum cool by rotating the temperature dial counterclockwise. Step 4: Engage the A/C compressor by pressing the air conditioner button. Step 5: Set the air source to recirculation mode by pressing the outside air / recirculation air button. The button indicator light should be illuminated. Step 1: Adjust the fan speed to high by rotating the fan control dial clockwise. Step 2:
Set the air distribution dial to the floor setting. Step 3: Adjust the air temperature to maximum heat by rotating the temperature dial clockwise. The HVAC system can be used to reduce the humidity level of the cab and clear fog from the windshield. Step 1: Adjust fan speed to the desired airflow setting. Step 2: Engage the A/C compressor by pressing the air conditioner button. Step 3: Set the air source to outside air mode by pressing the outside air / recirculation air button. The button indicator light should NOT be illuminated. 3 The engine must be at operating tem perature for maximum heating.
If op erating in AUTO mode, heating airflow is not allowed until the engine warms sufficiently to provide required coolant temperatures. NOTE NOTE That the A/C compressor may not en gage when the outside temperature is below 34єF (1єC). 3-88 Y53-1200-1B1 (04/13)