PACCAR Inc. T680 — Cooling system maintenance

COOLING SYSTEM The minimum fluid level is determined by the line on the surge tank indicated by the letters This indicator is located below the fill cap. If frequent topping off is necessary and there are no visible signs of coolant leaks when the engine is cold, check for leaks with the engine operating at normal temperature. NOTE The cooling system will need fluid if the surge tank level does not rise to the line regardless if the system is hot or cold. Top off the cooling system when coolant does not rise to the level indicated as on the surge tank. The surge tank is translucent which allows the coolant level to be seen. Add coolant through the surge tank fill cap.

Do not remove the pressure cap to fill the cooling system. Surge Tank Refilling Your Radiator NOTE 1. If your cooling system is built with drain valves in the upper engine coolant pipe, open them before filling the surge tank. Do not use the pressure cap to fill the surge tank with fluid. 5 Proper Coolant Level 2. Close any open coolant drains in the system. Do not overfill a cooling system. Ex cess coolant may result in overflow, loss of antifreeze, and reduced corro sion protection. NOTE 3. Remove the surge tank fill cap (do not remove the surge tank pressure cap). 4. Fill the system with premixed coolant through the surge tank fill cap.

Pour coolant at a steady flow 5-74 Y53-1200-1B1 (04/13)