NOISE AND EMISSION CONTROL Engine Fan and Shroud Hood Insulation Blanket Inner Fender Shields and Cab Skirts WARNING! Check all fasteners for condition and security. Repair or replace Do not work on the fan with the engine any broken or defective fasteners. running. The engine fan can engage at any time without warning. Anyone Check for chafing or tears. Patch near the fan when it turns on could be it if necessary. Find the cause of injured. Before turning on the ignition, the damage. If any component be sure that no one is near the fan. or accessory is causing wear or damage and cannot be relocated, Check all fasteners for tightness.
put reinforcing pads on the blanket Check for stress cracks in the at the site of wear. shroud. Make sure the shroud is adjusted so that it does not touch the fan blades. Check all fasteners that hold the fender shields in place. Check fender shields for tire marks, worn spots, or damage from objects thrown from tire treads. Check cab skirts, sills, and brackets for overall condition and repair them as necessary. Damaged rubber fender shields or cab skirting cannot be repaired. You will need to replace it. Check to verify that the fan is disengaged (not turning) with the engine running at normal operating temperatures (from cold to the point that the fan engages).
5 Check fan blade mounting bolts. Inspect fan blades to be sure they are not cracked or bent. (04/13) Y53-1200-1B1 5-123