PACCAR Inc. T680 — Wheel Replacement with Disc Brake Option

TIRES AND WHEEL Wheel Replacement with Disc Brake Option installing any replacement wheel, always inspect the tires/wheels to ensure there is adequate clearance between other vehicle components. WARNING! Use only the wheel brand, size and Nut Tightening Sequence for Stud part number originally installed. Use Piloted Disc Wheels of a different wheel brand or size could cause valve stem to interfere with a brake component which could lead to loss of vehicle control. Failure to com ply may result in death, personal injury, equipment or property damage. With the hood open, check for clearance between the wheel and disc brake assembly.

Use a hydraulic jack to raise the front of the vehicle off the ground to allow the wheel to spin freely. While rotating the wheel, check to ensure there is adequate clearance between the wheel and disc brake assembly. Vehicles equipped with front disc brakes are fitted with wheels designed specifically for disc brake applications. If it ever becomes necessary to replace an original equipment wheel, the replacement wheel must be the same brand and size as the take-off wheel. On vehicles equipped with 22.5 in. disc wheels, installing the wrong replacement wheel could result in the wheel valve stem making contact with the disc brake assembly. When 5 5-144 Y53-1200-1B1 (04/13)