VEHICLE RECOVERY AND SPRING BRAKES Recovery Hitch Installation If your vehicle is not equipped with the proper recovery hitch assembly, Use the following procedure to install contact an authorized dealer to obtain the Vehicle Recovery Hitches. See the proper equipment. Recovery Hitch Assembly illustration for part identification. 2 1. Check square sockets behind lower bumper for obstructions, clear if necessary. 2. With lock pins removed, insert hitches through bumper and into the square hitch socket. 3. Align the hole in the tow hitch with the square hitch socket hole. Recovery Hitch Assembly 4.
Insert the lock pin into the square 1 Tow Pin hitch socket hole and through 2 Tow Hitch the hole in the tow hitch until the 3 Square Hitch Socket lock tab is within the square hitch 4 Lock Pin socket. 5 Lock Tab 5. Rotate the lock pin 90 degrees to secure the pin in place. 6. Remove the hitches and store all parts after recovering the vehicle. (04/13) Y53-1200-1B1 2-15