PACCAR Inc. T680 — Vehicle Recovery Guidelines

VEHICLE RECOVERY AND SPRING BRAKES Recovery Rigging Never loop a single chain or cable cable no closer than 6 ft. from the through both hitches (3). vehicle (2). To connect to the vehicle, follow the suggested rigging methods below. Use a double chain or cable setup that distributes the load equally to both hitches. See 1 or 2 in Recovery Rigging illustration. Use a spreader or equalizer bar to distribute the load on both hitches (1). 2 If no spreader bar is available, connect the main tow chain or 1. Spreader Bar or Equalizer 2. Minimum 6 FT. 3. NEVER USE SINGLE CHAIN OR CABLE Preferred Acceptable LOOPED THROUGH TOW DEVICES (04/13) Y53-1200-1B1 2-19