VEHICLE RECOVERY AND SPRING BRAKES CAUTION Recovery Hitch Capacities Connect recovery rigging only to hitches intended for that purpose. Do not attach to bumpers or brackets. Connections to other structural parts could damage the vehicle. The maximum rated loads for vehicle recovery varies depending on the direction or angle of pull. These capacities are listed in the table below and are for the two hitches working together, simultaneously. Recovery pull maximums assume the tow rigging evenly distributes the load between both recovery hitches. See examples in Recovery Rigging on page 2-19 for details. Serious damage to the vehicle may occur if rigging is not connected properly.
CAUTION 2 Hitch Capacities CAUTION When recovering ditched or bogged vehicles, stay well below Maximum Capacities. Even at loads below maxi mum, the physical strain of recovering a vehicle could damage axles, sus pensions, fifth wheels, etc. 2-18 Y53-1200-1B1 (04/13) DIRECTION OF PULL MAXIMUM CAPACITY (Lb) * Directly Forward 80,000 Directly Vertical or Horizontally to the Side 14,600 45º in any Direction 20,000 * Both hitches pulled simultaneously.