Case IH AFX8010 — ENGINE COOLANT SYSTEM

POWER PRODUCTION - ENGINE COOLANT SYSTEM 9. Add the proper amount and specified coolant (See Operators Manual) to the shunt tank. Fill the shunt tank to above sight glass and install pressure/filler cap . Start the engine and run it at low idle until the water temperature is at normal operating temperature. Re-check the shunt tank to ensure proper level was maintained. If system is low add coolant until air pockets have been filled in the system. D49-39 - Hot coolant can spray out if radiator cap is removed. To remove radiator cap: Let system cool, turn to first notch, then wait until all pressure is released. Scalding can result from fast removal of radiator cap.

Check and service cooling system according to maintenance instructions. CAUTION 10034916 6 9675 1 27/05/2004 B.50.A / 14