POWER PRODUCTION - ENGINE COOLANT SYSTEM Fan and drive - Remove (B.50.A.54 - F.10.A.10) AFX8010 Prior operation: To gain better access to the fan and drive, certain engine shields may be removed, see; Engine hood - Remove (E.20.A.72 - F.10.A.10) 1. To remove the fan shroud the engine shielding needs to be removed so access can be gained, and enough clearance to remove the shroud halves. 2. Each halve is held to the cooler housing by 6 M8 x 20 mm bolts . The halves are bolted to each other by two M6 x 20 mm bolts one at the top and one at the lower center of the halves. 50034944 1 3. Remove the six M10 x 20 mm bolts from the fan using a 17mm socket and ratchet. Remove the fan from the engine.
50034942 2 50035890 3 9675 1 27/05/2004 B.50.A / 32