Case IH AFX8010 — ENGINE COOLANT SYSTEM

POWER PRODUCTION - ENGINE COOLANT SYSTEM 4. To remove the belt from the engine drive, use a long handled 1/2 inch drive breaker bar and insert it into the belt tensioner. Pulling up on the handle will allow the belt tension to loosen. At this point the belt can be removed, and the tensioner relaxed. NOTE: The belt tensioner has strong spring force that can cause harm if not careful. Take care when removing the belt and holding pressure to the tensioner. Try and keep fingers clear of potential pinch points. Use of another person may be helpful to remove the belt while the tension is relaxed. 50034738 4 9675 1 27/05/2004 B.50.A / 33