Case IH AFX8010 — ENGINE COOLANT SYSTEM

POWER PRODUCTION - ENGINE COOLANT SYSTEM Sensing system Coolant temperature - Over limit value (B.50.A.95.90 - G.30.C.22) AFX8010 E0152-00 - Coolant Temperature Sensor Context: When the engine coolant temperature exceeds 102 °C ( 223 °F ) for more than 2 seconds, the alarm message "A0000 Engine Coolant Temperature HIGH" will be displayed to the operator, and the engine will be shutdown within 2 seconds to prevent engine damage from occurring. When the alarm message is displayed, a permanent record is created in the error history. Cause: The "A0000 Engine Coolant Temperature HIGH" alarm has occurred at least once on the vehicle. Possible failure modes: 1.

The engine cooling system has been overheated during vehicle operation. Solution: 1. This error message appears as a permanent record that an engine coolant overheat condition has occurred on the combine, and cannot be erased using the combine display controls. The EST must be used to erase this fault code. A. If this fault code appears, remove and inspect the engine oil for indication of internal damage. NOTE: This fault code is reported by the ECU (which monitors the coolant temperature using the coolant temp sensor B-44) via CAN to the CCM2 module. This fault condition is recorded in both the ECU and the CCM2 module. 9675 1 27/05/2004 B.50.A / 41