Case IH AFX8010 — STARTING SYSTEM

POWER PRODUCTION - STARTING SYSTEM Cold start aid Pre-heating - Remove (B.80.A.30.81 - F.10.A.10) AFX8010 1. Disconnect the battery. 2. Disconnect the temperature sensor, (2) , by carefully un-threading the locking ring. Disconnect the boost pressure sensor connector, (3) . Remove the two power leads from the grid heater unit. NOTE: There is a dry gasket on either side of the grid heater. Observe the proper orientation and position of the grid gaskets for installation. NOTE: During grid heater removal, make sure no dirt and debris enters the engine head. Cover the engine head whenever the grid heater is not in place. 10010905A5 1 3.

Un-thread the bolts, (2) to remove the air intake manifold, (3) , and grid heater, (1) , from the engine head. 20030059A5 2 9677 1 27/05/2004 B.80.A / 7