Case IH AFX8010 — STARTING SYSTEM

POWER PRODUCTION - STARTING SYSTEM B. If the voltage reading is 10 - 18 volts , and the diagnostic screen is still indicating voltage in excess of 18 volts , there is an internal fault in CCM2. Reload the software for CCM2. If that does not correct the concern, replace the module. 5. Operate the machine while observing the Universal Display Plus "DIAG" screen. A. If no high out of range readings are detected, erase the fault code and continue operation. Wiring harness - Electrical schematic frame 09 (A.30.A.88 - C.20.E.09) AFXSCHEM09-04 1 9677 1 27/05/2004 B.80.A / 20