DISTRIBUTION SYSTEMS - PRIMARY HYDRAULIC POWER SYSTEM B. If there is continuity, the open circuit is in the main frame (MF) harness between connector X011 pin 8 and connector X019 pin J2-14 wire 488 blue, 401 blue or 460 blue. Locate the open and repair. 6. Visually inspect harness and connectors for damage, bent or dislocated pins, corroded terminals or broken wires. A. If no damage is found, erase fault code and continue operation. Wiring harness - Electrical schematic frame 10 (A.30.A.88 - C.20.E.10) AFXSCHEM10-04 1 9665 1 27/05/2004 A.10.A / 9 7