POWER TRAIN - TRANSMISSION Mechanical Shaft - Remove (C.20.B.43 - F.10.A.10) AFX8010 Prior operation: If the shifting disc is not removed from the transmission, first proceed with the first three steps of Transmission command - Remove (C.20.B.05 - F.10.A.10) to bring the shifting disc to it’s highest position. 1. To remove the drive shaft, first remove the five nuts and washers (1) . Remove two bolts and washers (2) . 3332a 1 2. Insert two bolts (1) in cover (2) and pull the cover. NOTE: Keep shim pack and O-ring with the cover. 3333a 2 3. Remove driver shaft (1) and selector fork (2) with a hoist. 3334a 3 9680 1 27/05/2004 C.20.B / 40