POWER TRAIN - TRANSMISSION Mechanical 8. Install shifting drive gear housing (3) and tighten four special bolts (1) and bolt (2) . Torque the M6 bolts to 10 - 11 Nm(7 - 8 lb ft) 3346b 8 9. Insert the shifting drive gear from the inside of the gearbox and install the friction ring and retaining ring (1) . 3347a 9 10. Install electric motor. (2) . Install special bolts and washers (1) .Torque the M6 bolts to 10 - 11 Nm (7 - 8 lb ft) . NOTE: If necessary to change gears manually while assembling the input shaft, the drive shaft and the differential into the gearbox, wait for installing the electric motor until the end. 3345a 10 9680 1 27/05/2004 C.20.B / 39