Case IH AFX8010 — TRANSMISSION Mechanical

POWER TRAIN - TRANSMISSION Mechanical 12. Insert threaded shaft (2) and seal ring. Torque to 50 - 60 Nm (37 - 44 lb ft) . IMPORTANT: After tightening baffle bolts, rotate the input shaft and verify that the oil baffle does not interfere with the input shaft. If there is interference adjust and shim as necessary or modify baffle as needed. 3340c 12 13. To install the drive shaft in the transmission, first install the bearing cup (1) . 3335a 13 14. If necessary replace the seal (2) . Install bearing cup (3) . Install shim pack (4) of 1.5 mm ( 1/16 in ) and O-ring (5) on cover (1) . 3438a 14 15. Support the drive shaft (1) on a hoist and bring it into the transmission. NOTE:

If the shifting disc is installed (3) , selector fork (2) should be installed together with the counter shaft. 3334a 15 9680 1 27/05/2004 C.20.B / 47