POWER TRAIN - TRANSMISSION Mechanical 4. Install needle bearings (1) . 3398a 4 5. Install gear (2) . Install washer (3) and heat bearing (4) to 80 °C ( 176 °F ) and install it on the drive shaft. CAUTION 47-41B - Use insulated gloves or mittens when working with hot parts. 3506a 5 6. Install washer (3) . Install new lock-washer (2) . Install nut (1) using tool 380001074 and tighten it to a torque of 150 - 170 Nm ( 111 - 125 lb ft ) . Secure nut (1) by bending a lip of the lock-washer into one of the notches of the nut. 3396a 6 7. To assemble the input shaft begin by installing needle bearings (1) . Install gear (2) . Install selector housing (3) . Install washer (4) .
3412a 7 9680 1 27/05/2004 C.20.B / 54