DISTRIBUTION SYSTEMS - SECONDARY HYDRAULIC POWER SYSTEM 6. Disconnect the gearbox (GB) harness from the main frame (MF) harness at connector X011 . Use a multimeter to check for voltage on connector X011 pin 31. A. If no voltage is found, the short is in the gearbox (GB) harness between connector X098 pin C and connector X011 pin 31 wire 423 yellow. Locate the short and repair. B. If high (> 5.2 volts ) voltage is found, the short is in the main frame (MF) harness between connector X011 pin 31 and connector X016 pin J2-19 wire 423 yellow. Locate the short and repair. 7. Operate the machine while monitoring Universal Display Plus "DIAG" screen. A.
If no high out of range readings are indicated, erase the fault code and continue operation. 9666 1 27/05/2004 A.12.A / 8