TRAVELLING - FRONT AXLE 17. Install shim pack (5) . Install washer (4) , locking plate (3) and bolts (2) . Torque bolts to 320 Nm ( 236 lb ft ). Turn up corners of the locking plate to prevent bolt heads from turning. Apply sealing compound type 6 (Loctite 638) to cover (1) and install cover (1) . zda46661a 16 18. Install bearing cup (5) into outer final drive gearbox housing. Bearing cup must be fully seated into outer housing. 4900a 17 19. Install seal (5) in bearing cover (2) . zda4349a 18 20. Install bearing cup (4) in bearing cover (2) . Bearing cup must be fully seated in cover. Install O-ring (6) . 9686 1 27/05/2004 D.10.A / 29